Select Page
Certify Your Designs To Industry Standards

Are your designs BSI 5295 proof? Are your designs ISO 9001 proof?

What happens if a client or customer asks you these questions, how do you determine whether your designs meet or fail a specific industry standard? Well you don’t until you have tested them. To verify industry standards you can conduct physical testing or use simulation software.

In SolidWorks Simulation you have the tools to be able to conduct in depth FEA and CFD analysis. The results can then be exported into a professional report for you to present to your client in confidence.

 

Proving Industry Standards in SolidWorks

This great example shows how SolidWorks can be used to certify a design meets a specific factor of safety or standard.

Cadtek Systems customer T & I Solutions specialise in working at height and safe access solutions, using SolidWorks to design and manufacture a wide range of products. Recently a client asked them to prove a design met the current British Standards for permanent ladders, stairs and walkways (BS5395 – Part 3). Knowing SolidWorks had the capability and rather than subcontracting this job out, they approached Cadtek support desk to ask how this could be achieved.

In the below video tutorial Elite SolidWorks Engineer, Stuart Wortley, was able to take their design and using SolidWorks Simulation, produce a report that proved just this!

If you’re interested in learning more about SolidWorks Simulation please call us on 01663 741405.

T & I Solutions

T&I Solutions specialise in Working at Height and Safe Access Solutions; with extensive experience in the rope access and safety at height industries. They produce a catalogue of standard parts and assemblies but are more than happy to develop bespoke solutions for your installations.

Keep In Touch

To keep up to date with all our videos, updates and information, follow us on Twitter, Youtube or LinkedIn.

What’s Next?

Bailey Caravans

Products used:

SolidWorks
Composer
SolidWorks PDM
Simulation

Origin Frames

Products used:

SolidWorks
DriveWorks
PhotoView360

Static Systems

Products used:

SolidWorks
Composer
SolidWorks PDM
DriveWorks

The Ex Zone

Products used:

SolidWorks
SolidWorks Electrical

Cadtek is part of the Solid Solutions Group

You are about to be transferred to a section of the Solid Solutions website (solidsolutions.co.uk). Cadtek forms part of the Solid Solutions Group and the page you have requested is best provided through our shared services platform.

You will be redirected to

Click the link above to continue or CANCEL